|
Product Usage
Suitable for signal transmission lines with AC rated voltage 450/750V and below, electrical instruments and automated control systems.
Implementation standard: Q/32100KLA207 TICW3-2009
Usage Features
Rated voltage Uo/U: 450/750V
Working temperature: The long-term working temperature of the conductor does not exceed 200°C.
Minimum ambient temperature: -65℃
Minimum bending radius:
Non-armored cables should be no less than 8 times the outer diameter of the cable
Armored or shielded structural cables should be no less than 15 times the outer diameter of the cable
Basic model and product name
| Model |
Product name |
| KFV |
Copper core fluoroplastic insulated 105℃ flame retardant PVC sheathed control cable |
| KFVP1 |
Copper core fluoroplastic insulated 105℃ flame retardant PVC sheathed tinned copper wire braided shielded control cable |
| KFV22 |
Copper core fluoroplastic insulated 105℃ flame retardant PVC sheathed steel tape armored control cable |
| KFVX |
Tinned copper core fluoroplastic insulated 105℃ flame retardant PVC sheathed control cable |
| KFVP1X |
Tinned copper core fluoroplastic insulated 105℃ flame retardant PVC sheathed tinned copper wire braided shielded control cable |
| KFV22X |
Tinned copper core fluoroplastic insulated 105℃ flame retardant PVC sheathed steel tape armored control cable |
| KFF |
Fluoroplastic insulated and sheathed control cable |
| KFFP |
Fluorine 46 insulated and sheathed copper wire braided shielded control cable |
| KFFRP |
Fluorine 46 insulated and sheathed copper wire shielded control flexible cable |
| item item |
Code |
Shuo Ming |
| Series code |
K |
Control cable |
| Insulating materials |
F |
Polyfluoroethylene-propylene (F46) |
| Shielding materials |
/
P1 |
Can be omitted if no masking
Tinned copper wire |
| Sheath material |
V
F |
105℃ Flame retardant polyvinyl chloride (F46) 105℃
Polyperfluoroethylene-propylene (F46) |
| Armor materials |
2
3 |
Steel tape armor
Thin steel wire armor |
| Conductor material |
/
X |
No coating omitted
Tin plating |
| Specifications |
|
Fill in the number of cores× conductor cross-section (N×S)
N:2,3,4,5,6,7,8,9,10,12,14,……37
S:0.5, 0.75, 1.0, 1.5, 2.5(mm2) |
| Conductor type (fill in brackets) |
A
B
R |
Single strand conductor
Seven-strand glued conductor
Stranded soft conductor |
Delivery length
Delivery is based on the length agreed upon by both parties. The length measurement error is allowed to be ±0.5%. If there are special requirements, the supply and demand parties will negotiate separately.
 
|
